|
 |
|
|
Material: Cast Nylon 6 Heat Stabilised - Ertalon® 6XAU+Heat stabilised cast nylon 6 with a dense and highly crystalline structure. It offers better mechanical properties than conventional extruded or cast nylons, including superior resistance to creep and wear, better heat ageing performance and excellent machinability. Ertalon® 6XAU+ is particularly recommended for bearings and other mechanical parts subject to wear that are operating at temperatures above 60°c.
|
Print Version
| Colour | - | - | Black | | Density | ISO 1183 | g/cm³ | 1.15 | | Water Absorption - saturation in air (23°c/50%RH) | - | % | 2.20 | | Water Absorption - saturation in water (23°c) | - | % | 6.50 | | Tensile strength*¹ | ISO 527 | N/mm² | 83 | | Tensile modulus of elasticity*¹ | ISO 527 | N/mm² | 3400 | | Elongation at break*¹ | ISO 527 | % | 25 | | Impact - Charpy*¹ | 179/1eU | kj/m² | No break | | Impact – Izod notched | 180/2A | kj/m² | 3.5 | | Hardness | Rockwell Shore D | - | M87 | | Melt point | - | °c | 220 | | Max service temp in air short periods | - | °c | 180 | | Max service temp continuously for 20000hrs | - | °c | 105 | | Linear thermal expansion coefficient | - | K-1x10-5 | 8.0 | | Thermal Conductivity | - | W/(K.m) | 0.29 | | Flammability*² (6mm thickness) | - | - | HB | | Volume resistivity*¹ | IEC93 | Ohm.cm | >1014 | | Dielectric strength*¹ | IEC243 | Kv/mm | 29 | | Outside applications – UV resistance | - | - | B | | Acids – strong (Ph<3) | - | - | C | | Alkalis – strong (pH>11) | - | - | B/C | | Chlorinated Hydrocarbons | - | - | A/B | | Hot Water | - | - | B | | | | ‘A’ – Acceptable service, ‘B’ – Limited, ‘C’ – Unacceptable | | *¹ Measured on dry test specimens (where applicable) | | *² Tests completed by Quadrant EPP using UL test methods. |
|
Availability:Rod,3m long – 50-150mm diameter
Rod,1m long – 50-500mm diameter
Plate,610mm x 1220mm, 1220mm x 2440mm – 8-100mm thickness
Tube,2m long x 50–150mm od x 20–135mm id.
Tube,1m long x 155mm-260mm od x 50–235mm id.
Applications:Racks, Pinions, Gears, Bearings, Rollers, Wheels, Cable Sheaves, Cams, Nuts, Valve seats, Pulleys, Gaskets, Electrical Insulato
|
|
The data shown are typical values and are not intended to represent specifications. Their aim is to guide the user toward a material choice. Not all material sizes shown within the availability programme of this data sheet are available as standard. Please contact ABG Rubber and Plastics Ltd for further details.
|
|
|
|