|
 |
|
|
Material: Stanyl® - Ertalon® 4.6Compared with the conventional nylons, Ertalon® 4.6 (Stanyl®) features a better retention of stiffness and creep resistance over a wide range of temperatures as well as superior heat ageing resistance. Applications for Ertalon 4.6 are suited in the higher temperature are (80-150°c) where stifness, creep resistance, heat ageing resistance, fatigue strength and wear resistance of PA6, PA66, POM and PET fall short.
|
Print Version
| Colour | - | - | Reddish Brown | | Density | ISO 1183 | g/cm³ | 1.18 | | Water Absorption - saturation in air (23°c/50%RH) | - | % | 2.8 | | Water Absorption - saturation in water (23°c) | - | % | 9.5 | | Tensile strength*¹ | ISO 527 | N/mm² | 100 | | Tensile modulus of elasticity*¹ | ISO 527 | N/mm² | 3300 | | Elongation at break*¹ | ISO 527 | % | >25 | | Impact - Charpy*¹ | 179/1eU | kj/m² | No break | | Impact – Izod notched | 180/2A | kj/m² | 8 | | Hardness | Rockwell Shore D | - | M92 | | Melt point | - | °c | 295 | | Max service temp in air short periods | - | °c | 200 | | Max service temp continuously for 20000hrs | - | °c | 135 | | Linear thermal expansion coefficient | - | K-1x10-5 | 8.0 | | Thermal Conductivity | - | W/(K.m) | 0.3 | | Flammability*² (6mm thickness) | - | - | HB | | Volume resistivity*¹ | IEC93 | Ohm.cm | >1014 | | Dielectric strength*¹ | IEC243 | Kv/mm | 25 | | Outside applications – UV resistance | - | - | A | | Acids – strong (Ph<3) | - | - | C | | Alkalis – strong (pH>11) | - | - | B/C | | Chlorinated Hydrocarbons | - | - | A | | Hot Water | - | - | B | | | | ‘A’ – Acceptable service, ‘B’ – Limited, ‘C’ – Unacceptable | | *¹ Measured on dry test specimens (where applicable) | | *² Tests completed by Quadrant EPP using UL test methods. |
|
Availability:Rod,1m & 3m long – 5-60mm diameter
Plate,1m & 3m long x 610 wide – 10-40mm thickness
Applications:Sealing rings for hydraulic equipment, Gears, Camplates, Hydraulic brake pistons, Electrical coil core
|
|
The data shown are typical values and are not intended to represent specifications. Their aim is to guide the user toward a material choice. Not all material sizes shown within the availability programme of this data sheet are available as standard. Please contact ABG Rubber and Plastics Ltd for further details.
|
|
|
|