|
 |
|
|
Material: PET-P + Lubricant - Ertalyte®TXPET compound incorporating a uniformly dispersed solid lubricant. Its specific formulation yields a premium internally lubricated bearing grade. Out standing wear resistance with lower co-efficient of friction than Ertalyte® as well as higher pressure-velocity capabilities.Physiologically inert.
|
Print Version
| Colour | - | - | Pale Grey | | Density | ISO 1183 | g/cm³ | 1.44 | | Water Absorption - saturation in air (23°c/50%RH) | - | % | 0.23 | | Water Absorption - saturation in water (23°c) | - | % | 0.47 | | Tensile strength*¹ | ISO 527 | N/mm² | 76 | | Tensile modulus of elasticity*¹ | ISO 527 | N/mm² | 3450 | | Elongation at break*¹ | ISO 527 | % | 7 | | Impact - Charpy*¹ | 179/1eU | kj/m² | >30 | | Impact – Izod notched | 180/2A | kj/m² | 2.5 | | Hardness | Rockwell Shore D | - | M94 | | Melt point | - | °c | 255 | | Max service temp in air short periods | - | °c | 160 | | Max service temp continuously for 20000hrs | - | °c | 100 | | Linear thermal expansion coefficient | - | K-1x10-5 | 6.5 | | Thermal Conductivity | - | W/(K.m) | 0.29 | | Flammability*² (6mm thickness) | - | - | HB | | Volume resistivity*¹ | IEC93 | Ohm.cm | >1015 | | Dielectric strength*¹ | IEC243 | Kv/mm | 21 | | Outside applications – UV resistance | - | - | A | | Acids – strong (Ph<3) | - | - | B | | Alkalis – strong (pH>11) | - | - | C | | Chlorinated Hydrocarbons | - | - | A/B | | Hot Water | - | - | B | | | | ‘A’ – Acceptable service, ‘B’ – Limited, ‘C’ – Unacceptable | | *¹ Measured on dry test specimens (where applicable) | | *² Tests completed by Quadrant EPP using UL test methods. |
|
Availability:Rod,1m long – 10-200mm diameter
Rod,3m long – 10-100mm diameter
Plate,1m & 3m long x 610mm - 8-100mm thickness
Tube,1m & 3m long - 20-200mm od x 12-160mm id
Applications:Slideways, Thrust washers, Bushings, Heavily loaded bearings and rollers, Pump component
|
|
The data shown are typical values and are not intended to represent specifications. Their aim is to guide the user toward a material choice. Not all material sizes shown within the availability programme of this data sheet are available as standard. Please contact ABG Rubber and Plastics Ltd for further details.
|
|
|
|