Material: HDPE - High Density Polyethylene - PE300HDPE has excellent impact strength even at temperatures as low as -30°c. With a low coefficient of friction, easily fabricated, high chemical resistance, food safe and very very good electrical and dielectric properties.
|
Print Version
| Colour | - | - | Natural/Black | | Density | ISO 1183 | g/cm3 | 0.954 | | Melt Index MFR 190/5 | IS0 1133 | g/10min | 0.45+/-0.05 | | Melt Index MFR 190/21.6 | IS0 1133 | g/10min | 11+/-0.1 | | Service Temp Upper | - | °c | 90 | | Service Temp Lower | - | °c | -50 | | Yield Stress | ISO 527 : 50mm/min | N/mm² | >23 | | Elongation at yield Stress | ISO 527 : 50mm/min | % | =8 | | Breaking stress | ISO 527 : 50mm/min | N/mm² | =32 | | Elongation at break | ISO 527 : 50mm/min | % | >50 | | Elastic modulus | ISO 527 | N/mm² | =700 | | Ball indentation hardness : 30 sec value | ISO 2039-1 | N/mm² | >40 | | Shore Hardness D : 3 sec value | ISO 868 | - | 60 | | Shore Hardness D : 15 sec value | ISO 868 | - | 59 | | Notched impact strength | ISO 179 | mJ/mm² | 12 | | Wear by the sand and slurry method | Internal Test Method | - | 1000 | | Vicat Softening Point VST | ISO 306/B | °c | 67 | | Crystalline melting range | ISO 3146 | °c | 130 | | Linear thermal expansion coefficient (23-80°c) | DIN 53752 | k-1 | 2 x 10-4 | | Thermal Conductivity | DIN 52612 | W/(K.m) | 0.41 | | Volume resistivity | VDE 0303/3 | Ohm/cm | 1016 | | Surface resistivity dry | VDE 0303/3 | Ohm | 1015 | | Arc resistance | VDE 0303/5 | Grade | L4 | | |
|
Availability:Available in a wide variety of sheets, rods, profiles and weld rod. Can be supplied to a colour match, talc-filled and in conductive forms. Please call for further details.
Applications:Widely used in automotive, leisure and industrial applications and is particularly suitable for the fabrication of tanks, silo's, hoppers etc.
|
|
The data shown are typical values and are not intended to represent specifications. Their aim is to guide the user toward a material choice. Not all material sizes shown within the availability programme of this data sheet are available as standard. Please contact ABG Rubber and Plastics Ltd for further details.
|
