|
 |
|
|
Material: PPH - Polypropylene Homo-PolymerPolypropylene's lightweight properties, temperature and chemical resistance and low friction surface make it an excellent modern replacement for more traditional materials such as metal and wood.High mechanical strength and tensile strength but a low notched impact strength. Polypropylene resists stress cracking and is easy to weld. The homo-polymer polypropylene offers higher rigidity, temperature limits and chemical resistance than the co-polymer.
|
Print Version
| Colour | - | - | Natural/Beige | | Density | ISO 1183 | g/cm³ | 0.91 | | Water Absorption | DIN 53495 | % | 0.01 | | Chemical Resistance | DIN 53476 | - | DIN 8075 | | Service Temp Upper | - | °c | 100 | | Service Temp Lower | - | °c | 0 | | Tensile strength at yield | ISO 527 | MPa | 30 | | Elongation at yield | ISO 527 | % | 13 | | Tensile strength at break | ISO 527 | MPa | 36 | | Elongation at break | ISO 527 | % | >100 | | Impact Strength | ISO 179 | kj/m² | No break | | Notched Impact Strength | ISO 179 | kj/m² | 8 | | Rockwell hardness | ISO 2039-1 | MPa | 67 | | Elastic modulus | ISO 527 | MPa | 1350 | | Vicat Softening temp VST/B/50 | ISO 306 | °c | 95 | | Heat Deflection temp HDT/B | ISO 75 | °c | 88 | | Linear thermal expansion coefficient | DIN 53752 | K-1x10-4 | 1.5 | | Thermal Conductivity at 20°c | DIN 52612 | W/(Km) | 0.22 | | Volume Resistivity | VDE 0303 | Ohm/cm | >1016 | | Surface Resistance | VDE 0303 | Ohm | >1013 | | Dielectric Constant @ 1MHZ | DIN 53483 | - | 2.3 | | Dielectric loss factor @ 1MHZ | DIN 53483 | - | 0.0002 | | Dielectric Strength | VDE 303 | kV/mm | 70 | | Tracking Resistance | DIN 53480 | - | KB>600 | | Bondability | - | - | Limited | | Physiology indifference | FDA | - | yes | | Friction Coefficient | DIN 53375 | - | 0.3 | | Flammability | UL94 | - | HB | | |
|
Availability:Available in a wide variety of sheets, blocks, rods and profiles.30% Glass Filled Reinforced and an Electrically Conductive (ESD) versions are available. Please call for further details.
Applications:Chemical storage tanks, Processing equipment, Fans, Pumps and valves, Machined components, Claddig, Partitioning.
|
|
The data shown are typical values and are not intended to represent specifications. Their aim is to guide the user toward a material choice. Not all material sizes shown within the availability programme of this data sheet are available as standard. Please contact ABG Rubber and Plastics Ltd for further details.
|
|
|
|