|
 |
|
|
Material: PAI - Torlon® 4203Offers the best toughness and impact strength of all the Torlon® PAI grades. Beacause of its intrinsic high temperature resistance, high dimensional stability and good machinability it is very popular for precision parts in high-tech equipment. In addition, it's good electrical insulating ability provides numerous possibilities in the field of electrical components. Also available in Black 5530 grade (30% glass fibre reinforced) which gives higher stiffness, strength and creep resistance than the 4203 grade.
|
Print Version
| Colour | - | - | Yellow/Ochre | | Density | ISO 1183 | g/cm³ | 1.41 | | Water Absorption - saturation in air (23°c/50%RH) | - | % | 2.5 | | Water Absorption - saturation in water (23°c) | - | % | 4.5 | | Tensile strength*¹ | ISO 527 | N/mm² | 120 | | Tensile modulus of elasticity*¹ | ISO 527 | N/mm² | 4500 | | Elongation at break*¹ | ISO 527 | % | 10 | | Impact - Charpy*¹ | 179/1eU | kj/m² | No break | | Impact – Charpy notched*¹ | 179/1eA | kj/m² | 10 | | Hardness | Rockwell Shore D | - | E79 | | Glass transition temperature | - | °c | 285 | | Max service temp in air short periods | - | °c | 270 | | Max service temp continuously for 20000hrs | - | °c | 250 | | Linear thermal expansion coefficient | - | K-1x10-5 | 3.0 | | Thermal Conductivity | - | W/(K.m) | 0.26 | | Flammability*² (3mm thickness) | - | - | V-0 | | Volume resistivity*¹ | IEC93 | Ohm.cm | 1017 | | Dielectric strength*¹ | IEC243 | Kv/mm | 24 | | Outside applications – UV resistance | - | - | A | | Acids – strong (Ph<3) | - | - | B/C | | Alkalis – strong (pH>11) | - | - | B/C | | Chlorinated Hydrocarbons | - | - | A | | Hot Water | - | - | C | | | | ‘A’ – Acceptable service, ‘B’ – Limited, ‘C’ – Unacceptable | | *¹ Measured on dry test specimens (where applicable) | | *² Tests completed by Quadrant EPP using UL test methods. |
|
Availability:Rod,2440mm long – 2.36-50.8mm diameter
Plate,305, 610 & 1220mm long x 305 wide – 4.76-25.4mm thickness
Applications:Connectors, Switches, Relays, Thrust Washers, Valve Seats, Piston Rings, Mechanical Linkages, Bushes, Electrical and Thermal Insulator
|
|
The data shown are typical values and are not intended to represent specifications. Their aim is to guide the user toward a material choice. Not all material sizes shown within the availability programme of this data sheet are available as standard. Please contact ABG Rubber and Plastics Ltd for further details.
|
|
|
|