|
 |
|
|
Material: U-PVCPolyvinyl Chloride is rated self-extinguishing, has an exceptional chemical resistance and is easy to machine. With good mechanical and tensile strength and a high degree of stability makes this easily weldable product one of the most versatile plastics available.
|
Print Version
| Colour | - | - | Grey/Red/Black | | Density | ISO 1183 | g/cm³ | 1.45 | | Water Absorption | DIN 53495 | % | 0.02 | | Chemical Resistance | DIN 53476 | - | DIN 8061 | | Service Temp Upper | - | °c | 60 | | Service Temp Lower | - | °c | 0 | | Tensile strength at yield | ISO 527 | MPa | 55 | | Elongation at yield | ISO 527 | % | 3 | | Tensile strength at break | ISO 527 | MPa | 30 | | Elongation at break | ISO 527 | % | 33 | | Impact Strength | ISO 179 | kj/m² | No break | | Notched Impact Strength | ISO 179 | kj/m² | 3 | | Rockwell hardness | ISO 2039-1 | MPa | 120 | | Elastic modulus | ISO 527 | MPa | 3000 | | Vicat Softening temp VST/B/50 | ISO 306 | °c | 75 | | Heat Deflection temp HDT/B | ISO 75 | °c | 72 | | Linear thermal expansion coefficient | DIN 53752 | K-1x10-4 | 0.8 | | Thermal Conductivity at 20°c | DIN 52612 | W/(Km) | 0.14 | | Volume Resistivity | VDE 0303 | Ohm/cm | >1015 | | Surface Resistance | VDE 0303 | Ohm | >1013 | | Dielectric Constant @ 1MHZ | DIN 53483 | - | 3 | | Dielectric loss factor @ 1MHZ | DIN 53483 | - | 0.01 | | Dielectric Strength | VDE 303 | kV/mm | 20-40 | | Tracking Resistance | DIN 53480 | - | KB600 | | Bondability | - | - | Yes | | Physiology indifference | FDA | - | No | | Friction Coefficient | DIN 53375 | - | 0.6 | | Flammability | UL94 | - | V-O | | |
|
Availability:Available in a wide variety of sheets, blocks, rods and profiles.Reinforced (PVC-HI), Electrically Conductive (PVC-U ESD) and Clear (PVC-U Clear) versions are available. Please call for further details.
Applications:Chemical storage tanks, Ventilation Systems, Thermoformed Packaging, Fans, Pumps and valves, Machined components, Wall claddig, Display Products.
|
|
The data shown are typical values and are not intended to represent specifications. Their aim is to guide the user toward a material choice. Not all material sizes shown within the availability programme of this data sheet are available as standard. Please contact ABG Rubber and Plastics Ltd for further details.
|
|
|
|